5204 Patek Philippe platinum analytical waiting is torment, especially Fake breitling Watches Iced while waiting to have the exact object.
However, please do not rush, because waiting has ended! Patek Philippe has launched a new manual winding movement developed and horizontal clutch, with a perpetual calendar split seconds chronograph ref.5204P, Chronograph Series Adds new members.
5204 Patek Philippe platinum First, we look just at the power source 5204P.
CHR29-535Q movement after launch, CHR27-70 retirement on the statement.
27-70,29-535 movement than the original diameter and 2 mm long, 32 mm, and the thickness was thinner.
Gyromax? pendulum oscillation frequency of rolex replica china 4 Hz, 2.5 Hz before.
In addition, minute chronograph billboard now have instantaneous jump function.
Chronograph has two second-hand, their use varies.
Under normal operating state, both pointers to keep in sync.
When the function is activated after needle chronograph pointer stop immediately, so that the recording time interval.
After liberation, chronographs pointer resynchronize with the chronograph hand.
Committed between these two pointers a game machine, which we call ‘catch the game. ”
Be the game needs a heart-shaped cam and fork to turn along the edge of the cam-shaped ruby ??heart.
Patek Philippe with two innovative technologies, the new CHR29-535Q movement in the integration of these important functions.
Interesting things to come.
Before shaped craft disappeared octopus.
How fast octopus-shaped? Why it will be replaced by it Fake breitling Watches? Octopus-shaped gear is part of the separation device, the role of two completely separate chronograph, so that the cam follower to reduce drag and friction along the heart-shaped cam during rotation.
When you start running pin functions, the device is not equipped with separate chronograph often encounter such problems.
Replace the “octopus-shaped gear” very simple, but the octopus-shaped craft itself is very complicated, watchmakers set-up work is also very difficult.
Then comes the gooseneck separation system.
Before the separation system has eight arms around replica watches china, and each must be individually adjusted and the gooseneck separation system has a wheel arm and spring.
The separation system is actually a horizontal clutch means.
Separation gear “A” and chronographs point synchronous rotation.
After activation chronographs pointer, it all started in an orderly manner.
First of all, chronographs pointer on the two gripper arm “B” action will immediately stop the operation, at the same time, separate fork “C” and pinion Division “A” of the commitment and push it forward about 30 degrees, loosen the needle protruding through a cam arm around “D”.
Thus, the timing is still running and chronographs pointer pointer separation work is finished.
The crucial point is that the two functions are started simultaneously, otherwise the chronograph function will be lost precision.
After the function of chronographs, chronographs pointer must still remain fully compatible with the chronograph hand.
Firstly, the separation system to stop functioning.
separating gear wheel arm “A” follower release “B”, and two gripper arms “D” will be released chronographs pointer.
Second, with the cam wheel chronograph pointer arm must return to the neutral position, such as “E” shown in place.
Chronographs fake watches china pointer will return to perfect unity and chronograph (recalibrated) has been a thorny issue.
Cams, the cam follower rollers relative proportions heart shaped and should be as small as possible ruby, especially when included in the watch on the inside.
Therefore, chronographs pointer was a bit narrower than the chronograph, to conceal the existence of the bias adjustment.
In order to eliminate any possible bias adjustment, Patek Liches double bottom recast seconds after the needle-shaped cam and cam heart.
Cam wheel arm-shaped core is wider than the previous one, while the shape of the cam follower base until completely different place the wheel arm.
Of course, the new design is still used to track breitling replica watches ?ruby ??heart-shaped cam follower in the center, but with the previous calibration by the rollers are fully responsible for different chronographs pointer, relying only on the side rolls on both sides of the cam wheel arm heart shaped.
This ensures that each time the perfect fit.
Adjust the zero pointer is also a major problem, which is to ensure that all features of the chronograph can be done properly, the pointer must start from the zero mark.
After the return of function pointer to zero balance for watchmakers and users are essential.
Today we have found a solution.
We called them “hammer”, but more like two feet, they will return to zero chronograph connected with the heart-shaped cam.
Throughout, the two hammer in a single piece of stainless steel.
This construction method is still a problem.
If the weight of heavier hammer, then another hammer is too light, it will be the cause can not be adjusted to the mark of zero.
The Patek Philippe solution is to build a hammer connected so they stay synchronized throughout.
It is like human legs, hips combination has been synchronized to operate until the encounter uneven surfaces, such as stairs.
In this case, they will be separated movement and adjust their actions accordingly.
To produce true to the heritage of the brand, unique and innovative new complicated watches is never easy.
After years of research and development, Patek Philippe 5204P launched a model for this, his low-key appearance sober, innovative mechanical movement hidden in the case of platinum.