Category: Audemars Piguet Royal Oak Replica

Introducing a New Execution of the Royal Oak Minute Repeater Replica Watches in Titanium

Published / by nmmcom

Royal Oak Minute Repeater Supersonnerie in Titanium, Ref. 26591TI.OO.1252TI.03

The present generation of the Audemars Piguet Royal Oak Minute Repeater Supersonnerie Replica was introduced in a titanium version — case and bracelet — with a blue “Grande Tapisserie” dial and in a platinum version — platinum case on an alligator strap — with a black “Grande Tapisserie” dial. Both these executions were limited to just 20 pieces. The lineup got the superbly desirable titanium addition with a salmon dial, which was limited to 35 pieces. Today, Audemars Piguet has dropped yet another titanium version with a smoked grey “Grande Tapisserie” dial, save for the fact that this one, doesn’t have a limitation listed.

At 42mm, the watch follows the formfactor of the other variations released and has a smoked grey “Grande Tapisserie” dial that progressively becomes darker as it reaches towards the perimeter of the dial. The real talking point about the watch though is the Supersonnerie mechanism, initially developed and launched in 2016 in the Cheap Audemars Piguet Royal Oak Concept Replica collection, which gives the Royal Oak Minute Repeater Supersonnerie the volume and resonance typically associated with pocket watches.

What gave the 2016 Supersonnerie mechanism these qualities, starts with the patented gongs, case construction and striking regulator. Here the gongs are not attached to the mainplate and are instead mounted to a new device that acts as a soundboard that improves sound transmission and boosts sound amplification.

Next is the striking regulator, redesigned to incorporate an innovative, more flexible anchor system which absorbs shocks and eliminates unwanted noise. There’s also the mechanical modification of the chiming sequence that manages to mediate the quarter-hour pause between the chiming of the Audemars Piguet Replica Watches minutes and the hours, in the instances when the time does not require the striking of the quarter hours.

All of these are now adapted and incorporated into the hand-wound calibre 2953, which gives life to the Royal Oak Minute Repeater Supersonnerie. Now, while there isn’t a limitation number attached to today’s launch, it’s safe to say that the watch will be highly limited by production and availability.

Code 11.59 By Audemars Piguet Tourbillon Openworked, Ref. 26600CR.OO.D009KB.01

The Code 11.59 By Swiss Audemars Piguet Tourbillon Openworked Replica was first introduced as a unique design for Only Watch, with a creamy silver inner ring. Later, the watch was made into production and now has a grey lacquered inner ring.

Now, the watch has been redesigned with a rose gold black lacquered inner ring – case and bezel. Often hailed as one of the prettiest complications in the Code 11.59 By Audemars Piguet family, this new addition is no exception.

Michael Friedman, Head of Complications at Audemars Piguet, said of the introduction: “The architectural properties of Quality Audemars Piguet Code 11.59 Replica make it an ideal canvas for complications and skeleton mechanisms, as the case and movement blend seamlessly into a unified aesthetic. The new 26600CR Drawing inspiration from a one-of-a-kind piece, the skeletonized tourbillon features a multi-tone grey skeletonized movement housed in a white gold case and a rose gold octagonal middle case. The entire creation is an expression of hand-finishing and contemporary design, only when we are talented The watchmakers, artisans, technicians, engineers and product specialists we look forward to working together on behalf of our extraordinary clientele will make this possible.”

Audemars Piguet Royal Oak Replica Watches Swiss Movement

Published / by nmmcom

Audemars Piguet Royal Oak “Jumbo” Extra-Thin / 39mm Replica

The 15202, which in 2000 marked a turning point in the “Jumbo” history and Cheap Audemars Piguet Royal Oak Replica entrance into the third millennium, is now being retired to make way for the 16202.The 16202 is being announced in four metals and dial colors. 18-carat pink gold with a smoked grey dial, 18-carat yellow gold with a smoke yellow-gold dial, 950 platinum with a sunburst based smoked green dial and, lastly, a tribute to the very original Royal Oak, in stainless steel with the “Bleu Nuit, Nuage 50” dial.

A thin layer of varnish mixed with a few drops of black colour (n° 50) was then applied onto the dial to protect it. The term “nuage” refers to the cloud effect the drop of black creates when it enters the protective liquid varnish. Today, the “Bleu Nuit, Nuage 50″ hue is achieved in a more reliable method by PVD, which ensures consistent coloration.

The bevels adorning the top and the bottom of the case have been enlarged to enhance the play of light between the satin-finished and polished surfaces, while bestowing the Audemars Piguet Royal Oak Replica watch with a slender aesthetic. For its part, the caseback has been slightly more integrated into the case middle to sit more comfortably on the wrist.

The links are thinner throughout the bracelet, and therefore lighter, offering added comfort and optimum ergonomics. First introduced on Royal Oak models in gold a few years back, this evolved aesthetic appears for the first time on stainless steel and titanium references.

We have a movement that now has frequency of 4Hz, up from 2.75Hz, a power reserve that clocks in a minimum of 55 hours, up from 40 hours and at long last, a quick set date. The higher frequency, by virtue of theory suggests that the 7121 will keep better time, simply because the higher oscillation rate divides time into smaller spans, giving rise to a higher resolution time measurement.

Royal Oak Selfwinding Flying Tourbillon Openworked / 41mm Replica

The detailing on the skeleton movement evokes every emotion you might put into words that has to do with the idea of the future. There is a sense of three-dimensionality that not only shows off the intricacies of the openwork design but a contemporary spirit of strength and audacity similar to that which Cheap Audemars Piguet Replica gave us with the 5402, in 1972.

Royal Oak “Jumbo” Extra-Thin Openworked / 39mm Replica

The “Jumbo” is also getting a new skeleton iteration with the freshly baked Calibre 7124. As opposed to the Audemars Piguet Replica Watches Swiss Movement, the skeletonised design on the “Jumbo” Extra-Thin Openworked seems to pay greater homage to a more traditional sense of aesthetics.

Running at a frequency of 4Hz the Calibre 7124 is possibly a direct derivative of the 7121, sans the complete dial and baseplate, of course. The calibre does however seem to boast a higher power reserve at a 57-hour minimum (the 7121 boasts 55 hours).

Royal Oak Selfwinding / 37 mm & Royal Oak Selfwinding Chronograph / 38 & 41mm Replica

Best Audemars Piguet Replica Watches will be launching a refreshed line-up of selfwinding hour, minute, second and date models in 37 mm as well as new 38 and 41 mm selfwinding chronographs.Most of these are as well fitted with the dedicated Royal Oak “50-years” rotor, save for the 38mm chronographs with closed casebacks.

The minute track on these Royal Oaks, which was in the past printed on a flat surface on the perimeter of the Tapisserie dial, is now printed directly onto the Tapisserie pattern of all Royal Oak selfwinding hour, minute, second and date models.

Movement wise, Audemars Piguet Replica Watches For Sale has replaced the Calibre 3120 with a the 4Hz Calibre 5900, which will be powering the Royal Oak references in 37mm. The 5900 is thinner at 3.9 mm (vs 4.26 mm) and boasts 60 hours of power reserve.

 

Audemars Piguet Royal Oak Selfwinding Flying Tourbillon Extra-Thin Replica Watch

Published / by nmmcom

The Low-down

Cheap Audemars Piguet Replica launched a plethora of new arrivals – 34 to be exact. A true celebration of what the Royal Oak stands for – an incredible piece of design that not only remains relevant, but defines the industry’s current design output and looks at the collection itself in many ways.

Now referenced 16202, the Jumbo features subtle changes to the case and one-piece bracelet that accentuate its signature silhouette and make it more comfortable to wear. But the biggest change is that the Jumbo is now powered by an all-new calibre 7121. This new movement has been around for a long time, and it addresses all the trivial shortcomings of the JLC ébauche calibre 2121.

RD#1 is the most refined expression the minute repeater Swiss Audemars Piguet Replica can make, focusing on enhancing the volume, quality and harmony of the minute repeater. Its patented gong and case design produces a chime in the watch as loud and clear as a pocket watch. RD#2 is another complication in the form of an ultra-thin perpetual calendar. AP achieves this feat with a separate mechanism that incorporates the perpetual calendar function and reduces the height of the movement from three levels to a flat surface, with the dial also serving as the top plate.

The calibre 2968 of the Audemars Piguet Replica Watches China was developed alongside the calibre 7121 of the new Jumbo, both of which largely share the same architecture. In order to achieve the ultra-thin height of 3.4 mm of the calibre 2968, which is only 0.2 mm more than the calibre 7121, AP focused on redesigning the structure of the traditional tourbillon itself.

All of these changes are made to create a light and airy feel that complements Jumbo’s thin shell. According to Michael Friedman, Head of Complications, “The movement architecture is designed to provide a unique perspective of a smaller case, while demonstrating a fascinating contrast of hand-finishing techniques throughout.”

Through the sapphire case back, the semi-skeletonized movement and the open bridges of the self-winding gear train, the barrel and the movement running chain maintain a sense of lightness. The bridges themselves are no longer adorned with traditional Côtes de Genève, but more modern ruled tires. By contrast, the Audemars Piguet Royal Oak Replica refined bevels of the polished outer edges, and even the inner corners of the hollowed-out sections, demonstrate AP’s expertise in classic hand-finishing techniques. The similarly decorated two-way skeletonised oscillating weight is made of 22-karat rose gold, rhodium-plated to match the movement bridges.

As for the bathtub-shaped, luminous-filled indexes and hands, they are slimmer than other Audemars Piguet Replica Swiss Made, which have thicker faceted markers and hands. A further return to the original is the Audemars Piguet logo at 12 o’clock and the minute scale printed directly on the dial.

Whether you love or hate the tourbillon, exposed on the dial or otherwise, it is undeniably the ultimate expression of the beating heart, the most important part of a mechanical watch. Likewise, the Best Audemars Piguet Royal Oak Jumbo Replica Watch is the genre-defining and ultimate expression of luxury stainless steel sports watches.