Category: Audemars Piguet Royal Oak Jumbo Extra-Thin Replica

Buy Best Audemars Piguet Royal Oak “Jumbo” Extra-Thin (ref. 16202) Replica Watches Online

Published / by nmmcom

If you choose stainless steel, you get a Audemars Piguet Royal Oak “Jumbo” Extra-Thin replica watch with a straight genetic link to 1972. The case and bracelet are still hand-finished with Genta’s mixture of satin brushing and polishing to the case, bracelet and bezel chamfers. You also get the now-iconic Petite Tapisserie dial. This one comes in a Bleu Nuit, ‘Nuage 50’ hue. The firm originally behind the colour was Geneva-based dial maker Stern Frères, but today AP makes each dial in-house. Just as in the 1970s, though, to create the depth of hue needed, the dial maker has to immerse each dial in a galvanic bath for just the right amount of time.

Not long enough and you get a purple dial. Grab a quick coffee and leave it too long and your dial turns out black. To hit the desired colour you not only need to be a properly time-served dial maker, you need the bath to be at just the right temperature with the right mix of chemicals too. Originally, to protect the finish you’d apply a thin layer of varnish mixed with a few drops of No 50 black colour to the newly minted dial. Today, Cheap Audemars Piguet Replica uses physical vapour deposition to give an even spread of colour.

The 18-carat pink gold watch comes with a smoked grey dial, while the 18-carat yellow gold version’s dial is a dark, smoked yellow gold. Platinum, on the other hand, gets a smoked green sunburst finish. If you’re of a certain age and enjoy your motorcycles, you might even be reminded of the wonderful smoked paint finishes on BMW’s R100RS luxury sports tourer, a contemporary of the Royal Oak.

The dial is as much part of the Royal Oak’s look as Genta’s diving helmet porthole case. It’s not the sort of thing one could just stamp out by the dozen, either. When Stern Frères made the original dials, it did it with a guilloché machine. This hand-turned gadget allows the craftsman to carve out hundreds of the Audemars Piguet Replica Watches China trademark tiny, truncated square pyramid shapes on the dial from a copy-master.

The new 33 jewel movement has taken AP’s team five years to develop and they’ve managed to shoehorn in more new technology with a bigger mainspring barrel, a quick-date corrector and an in-house designed twin-reverser on the winding weight so it can wind in both directions. That chunkier mainspring barrel means the new Replica Watches Online movement stays accurate for longer as it doesn’t need to deal with power decay from the mainspring in the same way.

As well as being a thing of engineering beauty, the new movement is something of an aesthetic winner too. Look at the way the two-point mounted balance bridge reflects the bridge holding the mainspring barrel; it gives the movement real visual unity. And that’s without the final touches; the 268 parts are variously finished with Côtes de Genève, anglage and circular graining.

This sort of watchmaking and visual pernicketiness extends even to the winding weight. As you’d expect by now, it reflects the same brushing and polishing as the case. But for this anniversary year, Quality Audemars Piguet Replica will also fit each watch with a special openworked oscillating weight in 22-carat gold with a “50 years” logo and an engraved Audemars Piguet signature. The colour of the weight even matches the metal of the case. Neat.

Audemars Piguet Royal Oak Replica Watches Swiss Movement

Published / by nmmcom

Audemars Piguet Royal Oak “Jumbo” Extra-Thin / 39mm Replica

The 15202, which in 2000 marked a turning point in the “Jumbo” history and Cheap Audemars Piguet Royal Oak Replica entrance into the third millennium, is now being retired to make way for the 16202.The 16202 is being announced in four metals and dial colors. 18-carat pink gold with a smoked grey dial, 18-carat yellow gold with a smoke yellow-gold dial, 950 platinum with a sunburst based smoked green dial and, lastly, a tribute to the very original Royal Oak, in stainless steel with the “Bleu Nuit, Nuage 50” dial.

A thin layer of varnish mixed with a few drops of black colour (n° 50) was then applied onto the dial to protect it. The term “nuage” refers to the cloud effect the drop of black creates when it enters the protective liquid varnish. Today, the “Bleu Nuit, Nuage 50″ hue is achieved in a more reliable method by PVD, which ensures consistent coloration.

The bevels adorning the top and the bottom of the case have been enlarged to enhance the play of light between the satin-finished and polished surfaces, while bestowing the Audemars Piguet Royal Oak Replica watch with a slender aesthetic. For its part, the caseback has been slightly more integrated into the case middle to sit more comfortably on the wrist.

The links are thinner throughout the bracelet, and therefore lighter, offering added comfort and optimum ergonomics. First introduced on Royal Oak models in gold a few years back, this evolved aesthetic appears for the first time on stainless steel and titanium references.

We have a movement that now has frequency of 4Hz, up from 2.75Hz, a power reserve that clocks in a minimum of 55 hours, up from 40 hours and at long last, a quick set date. The higher frequency, by virtue of theory suggests that the 7121 will keep better time, simply because the higher oscillation rate divides time into smaller spans, giving rise to a higher resolution time measurement.

Royal Oak Selfwinding Flying Tourbillon Openworked / 41mm Replica

The detailing on the skeleton movement evokes every emotion you might put into words that has to do with the idea of the future. There is a sense of three-dimensionality that not only shows off the intricacies of the openwork design but a contemporary spirit of strength and audacity similar to that which Cheap Audemars Piguet Replica gave us with the 5402, in 1972.

Royal Oak “Jumbo” Extra-Thin Openworked / 39mm Replica

The “Jumbo” is also getting a new skeleton iteration with the freshly baked Calibre 7124. As opposed to the Audemars Piguet Replica Watches Swiss Movement, the skeletonised design on the “Jumbo” Extra-Thin Openworked seems to pay greater homage to a more traditional sense of aesthetics.

Running at a frequency of 4Hz the Calibre 7124 is possibly a direct derivative of the 7121, sans the complete dial and baseplate, of course. The calibre does however seem to boast a higher power reserve at a 57-hour minimum (the 7121 boasts 55 hours).

Royal Oak Selfwinding / 37 mm & Royal Oak Selfwinding Chronograph / 38 & 41mm Replica

Best Audemars Piguet Replica Watches will be launching a refreshed line-up of selfwinding hour, minute, second and date models in 37 mm as well as new 38 and 41 mm selfwinding chronographs.Most of these are as well fitted with the dedicated Royal Oak “50-years” rotor, save for the 38mm chronographs with closed casebacks.

The minute track on these Royal Oaks, which was in the past printed on a flat surface on the perimeter of the Tapisserie dial, is now printed directly onto the Tapisserie pattern of all Royal Oak selfwinding hour, minute, second and date models.

Movement wise, Audemars Piguet Replica Watches For Sale has replaced the Calibre 3120 with a the 4Hz Calibre 5900, which will be powering the Royal Oak references in 37mm. The 5900 is thinner at 3.9 mm (vs 4.26 mm) and boasts 60 hours of power reserve.

 

The Replica Audemars Piguet Royal Oak Jumbo Selfwinding Flying Tourbillon Extra-Thin RD#3

Published / by nmmcom

Cheap Audemars Piguet Replica has launched a series of models celebrating half a century of its iconic Royal Oak, including a 41mm Royal Oak flying tourbillon powered by the movement recently developed for the brand’s Code 11.59 collection.

What we see today is also the Royal Oak Flying Tourbillon, but it will excite the pure watch enthusiast. The challenge for AP’s watchmakers and engineers was to accommodate the complications reserved for the 41mm RO within the smaller 39mm Jumbo case.

Jumbo

Known for its octagonal bezel, eight white gold screws and one-piece bracelet, the Audemars Piguet Royal Oak’s Replica original 39mm stainless steel case was dubbed “giant”. You can read and watch our video about our warm reception of the new Jumbo Extra-Thin ref. 16202 and ultra-thin skeleton, equipped with a new in-house movement, known on AP as Caliber 2121, after five decades of reliance on the JLC 920 ébauche.

Jumbo Case And Dial

Notably, the classic case specifications of the new Jumbo 16202 – 39mm in diameter, 8.1mm in height and 50m water resistance – are preserved in the new Royal Oak RD#3 Best Replica Watch. Granted, the case is slightly thicker than the 7mm original, but comes with a sapphire caseback. The stainless steel case and bracelet feature the signature satin brushed and shiny hand-polished finish.

The new Jumbo Tourbillon 26670ST has a Bleu Nuit, Nuage 50 Petite Tapisserie dial. However, the color is now obtained using a PVD process, ensuring a consistent and long-lasting tone across all dials. The luminous-coated white gold-applied bathtub-shaped hour-markers and hands pay homage to the original. The noon Audemars Piguet signature and minute scale are printed in white, and the flying tourbillon is placed at 6 o’clock.

RD#3

AP’s ultra-thin self-flying tourbillon is a major breakthrough after five years of production and is listed as a research and development timepiece. In 2022, AP AAA Replica Watch presents its latest RD#3 watch, equipped with a new ultra-thin caliber 2968. Unlike previous RD concept watches, the RD#3 is not a concept watch and was released in time to celebrate the 50th anniversary of the Royal Oak. As the brand notes, this 39mm Jumbo with the new movement will be available in September 2022 in a 37mm version with different dial colors.

New Calibre 2968

The challenge of taking a tourbillon design previously reserved for 41mm Famous Replica Watch and fitting it in a 39mm Jumbo case was addressed with a different solution. The combination of titanium alloy and peripheral drive means that the adjustment mechanism is lighter and the energy distribution is improved. Visibility is also a key issue; the flying tourbillon is placed at dial level, and the balance arm has been redesigned and positioned to see the beating heart of the watch.

The movement is based on the new Caliber 7121 housed inside an automatic Jumbo 16202, with an extended power reserve and a rotor mounted on ball bearings. Consisting of 226 parts, the movement measures 29.6 mm in diameter and only 3.4 mm in height.

RO 39mm

Remember, only the Royal Oak 50th Anniversary Perfect Replica watch will be equipped with the special “50-Years” oscillating weight. In this case, the rotor is rhodium-toned 22k rose gold to match the tone of the stainless steel case, and has a polished and satin-brushed finish.

Hand-decorated movement components add a modern touch to the watch, with tires on the main plate and rhodium-toned skeleton bridges replacing the more traditional Côtes de Genève decoration. The movement beats at 21,600vph and offers a power reserve of 50 hours.