Audemars Piguet Royal Oak “Jumbo” Extra-Thin / 39mm Replica

The 15202, which in 2000 marked a turning point in the “Jumbo” history and Cheap Audemars Piguet Royal Oak Replica entrance into the third millennium, is now being retired to make way for the 16202.The 16202 is being announced in four metals and dial colors. 18-carat pink gold with a smoked grey dial, 18-carat yellow gold with a smoke yellow-gold dial, 950 platinum with a sunburst based smoked green dial and, lastly, a tribute to the very original Royal Oak, in stainless steel with the “Bleu Nuit, Nuage 50” dial.

A thin layer of varnish mixed with a few drops of black colour (n° 50) was then applied onto the dial to protect it. The term “nuage” refers to the cloud effect the drop of black creates when it enters the protective liquid varnish. Today, the “Bleu Nuit, Nuage 50″ hue is achieved in a more reliable method by PVD, which ensures consistent coloration.

The bevels adorning the top and the bottom of the case have been enlarged to enhance the play of light between the satin-finished and polished surfaces, while bestowing the Audemars Piguet Royal Oak Replica watch with a slender aesthetic. For its part, the caseback has been slightly more integrated into the case middle to sit more comfortably on the wrist.

The links are thinner throughout the bracelet, and therefore lighter, offering added comfort and optimum ergonomics. First introduced on Royal Oak models in gold a few years back, this evolved aesthetic appears for the first time on stainless steel and titanium references.

We have a movement that now has frequency of 4Hz, up from 2.75Hz, a power reserve that clocks in a minimum of 55 hours, up from 40 hours and at long last, a quick set date. The higher frequency, by virtue of theory suggests that the 7121 will keep better time, simply because the higher oscillation rate divides time into smaller spans, giving rise to a higher resolution time measurement.

Royal Oak Selfwinding Flying Tourbillon Openworked / 41mm Replica

The detailing on the skeleton movement evokes every emotion you might put into words that has to do with the idea of the future. There is a sense of three-dimensionality that not only shows off the intricacies of the openwork design but a contemporary spirit of strength and audacity similar to that which Cheap Audemars Piguet Replica gave us with the 5402, in 1972.

Royal Oak “Jumbo” Extra-Thin Openworked / 39mm Replica

The “Jumbo” is also getting a new skeleton iteration with the freshly baked Calibre 7124. As opposed to the Audemars Piguet Replica Watches Swiss Movement, the skeletonised design on the “Jumbo” Extra-Thin Openworked seems to pay greater homage to a more traditional sense of aesthetics.

Running at a frequency of 4Hz the Calibre 7124 is possibly a direct derivative of the 7121, sans the complete dial and baseplate, of course. The calibre does however seem to boast a higher power reserve at a 57-hour minimum (the 7121 boasts 55 hours).

Royal Oak Selfwinding / 37 mm & Royal Oak Selfwinding Chronograph / 38 & 41mm Replica

Best Audemars Piguet Replica Watches will be launching a refreshed line-up of selfwinding hour, minute, second and date models in 37 mm as well as new 38 and 41 mm selfwinding chronographs.Most of these are as well fitted with the dedicated Royal Oak “50-years” rotor, save for the 38mm chronographs with closed casebacks.

The minute track on these Royal Oaks, which was in the past printed on a flat surface on the perimeter of the Tapisserie dial, is now printed directly onto the Tapisserie pattern of all Royal Oak selfwinding hour, minute, second and date models.

Movement wise, Audemars Piguet Replica Watches For Sale has replaced the Calibre 3120 with a the 4Hz Calibre 5900, which will be powering the Royal Oak references in 37mm. The 5900 is thinner at 3.9 mm (vs 4.26 mm) and boasts 60 hours of power reserve.